Watchitude Move2 FAQ
Instructions
1: Power on: Press & hold the fingerprint on the face of the watch until screen lights up and vibrates
2: Power off: Press the fingerprint until you reach the more screen
> Press & hold the fingerprint until you reach power screen
> Press & hold the fingerprint until the watch vibrates and turns off
3: Charge Watch: Connect charging cable to a USB power source and connnect the magnetic tip to the back of the watch
![](https://cdn.shopify.com/s/files/1/1963/3149/files/Screen_Shot_2019-11-26_at_1.42.28_PM_c2551d55-c680-464e-91e8-8b26adfd8843_100x100.jpg?v=1578942525)
1: Install the Wearfit App & sync device (DO NOT connect through Bluetooth settings on your smartphone)
2: Turn on Bluetooth and location settings on your smartphone
3: Open Wearfit app
> Tap the dropdown Menu in upper left corner
> Tap "Device Management"
> Tap "Connection Management"
> Tap "Link Your Health Band"
> Tap "Move2"
> When successfully connected, the time will sync and a "Link" will appear next to the battery icon on the Move2 Watch face
Watch Features
Activate the features you want to use in the Wearfit App
1: Press the fingerprint once to switch screens
2: Press & hold the fingerprint to enter/quit the feature
Time/Date: Press & hold to change graphics
Enable 12-Hour Time: Press menu (top left corner of Wearfit App) > Setting > Enable 12-hour time
Steps Counter
Distance Tracker
Calorie Tracker
SMS Notifications: Press & hold to view unread text messages
Disable SMS Notifications: Press menu (top left corner of Wearfit App) > Devices Management > Reminder > Disable message notification
Light: Press & hold to adjust screen brightness
More: Press & hold to access additional features below:
Power Off: Press & hold to power off
Find: Press & hold to power off
Stopwatch: Press & hold to activate stopwatch
Back: Press & hold to go back to main menu
Open Wearfit App
1: Selfie Remote: Menu > Shake to take picture
2: Lift Wrist Screen Activation: Menu > Devices Management > Turn on screen activation
Weight: 40g
Battery: 90mAh
Band Size: 265mm
Material: Silicon/ABS
Water Resistant: IP67
Troubleshooting
Issues with Move2 communicating with your smartphone:
1: Swipe down on the main screen of the Wearfit app to refresh the data. In addition, try closing the app and re-opening it.
2: If issues persist, disconnect your phone from your Move2 Watch and start a new connection.
1: Disconnect in Wearfit App: Menu > Press "Unbind" or "Unlink"
2: Disconnect in smartphone's Bluetooth settings: Select the device > Press "Forget This Device"
3: Reconnect device: Wearfit App > Menu > Press "Bind Bracelet" or "Link Your Health Band"
1: While the Move2 Watch is water resistant, you SHOULD NOT swim for long preiods of time while wearing the device.
2: DO NOT change the rechargeable battery or open the case for any reason.
3: Always use the supplied charger cable.
4: DO NOT expose the device to a high moisture or high temperature environment for long periods of time.
5: This device contains a silicone band, a charging cable, and an activity watch.
6: This product is not a medical device.
7: DO NOT try to sync device through your smartphone's Bluetooth settings, ALWAYS use the Wearfit App.